Kannad S1821502-02 User Manual

Emergency Locator Transmitters
DMA174N
Ref. 0139162N
TP PAGE : 1
Date of rev. JUN 23/2008
Revision 12
First issue: SEP 02/1999
INSTALLATION MANUAL
OPERATION MANUAL
INSPECTION LOG
KANNAD 406 AF / AF-H / AF (6D)
P/N : S1821502-02 KANNAD 406 AF transmitter
P/N : S1822502-02 KANNAD 406 AF-H transmitter
P/N : S1821502-06 KANNAD 406 AF(6D) transmitter
P/N : S1820511-01 Mounting bracket, 1 strap
© KANNAD: This document is the property of KANNAD and contains proprietary and confidential information. The document is loaned on the express condition that neither the document itself nor the information contained therein shall be disclosed without the express consent of KANNAD and that the information shall not be used by the recipient without prior written acceptance by kannad Furthermore, the document shall be returned immediately to KANNAD upon request.

Kannad S1821502-02 Specifications

General

Brand	Kannad
Model	S1821502-02
Category	Transmitter
Language	English

Summary

System Functional Description and Operation

Transmitter Functionality

Explains how the transmitter is activated and its transmission frequencies and protocols.

ELT Controls and Indicators

Working Mode Information

Describes the four operating modes: Off, Self-Test, Armed, and On.

Armed Mode

Explains the standby mode for automatic crash sensor activation and its flight requirement.

On Mode (Transmission)

Details how the ELT enters transmission mode and its behaviour.

Autonomy and Battery Life

Electrical Characteristics and Interface

Technical Specifications

Provides detailed specifications for ELT type, transmission, G-Switch, battery, housing, and certifications.

Activation Procedures

Standby Mode Activation

Explains the standby mode for automatic crash sensor activation.

Manual Activation

Describes the steps for manually activating the ELT.

ELT Reset Procedure

Details how to stop the ELT in case of unintentional activation.

Installation and Removal

RTCA/FAR Installation Recommendations

Provides regulatory recommendations for ELT installation and mounting.

ELT Registration and Programming

Explains the mandatory ELT registration and programming process.

Pin Programming Option

ELT Mounting and Installation

Details the bracket installation steps, torque requirements, and drilling.

KANNAD 406 AF Installation

KANNAD 406 AF-H Installation

KANNAD 406 AF (6D) Installation

ELT Removal Procedure

First Power Up Procedure

Check and Self-Test

Self-Test Procedure and Periodicity

Operational Tests

ELT Operational Tests

Operational Tests (With Programming Dongle)

Remote Control Panel (RCP) Operational Tests

406 and 121.5 MHz Transmission Tests

Troubleshooting

Troubleshooting Self-Test Faults

Guides on interpreting visual indicator flashes for self-test failures.

Other Faults Detected

Servicing and Maintenance

Maintenance Schedule

Periodic Inspection Procedures

6-Year Maintenance and Battery Replacement

Battery Replacement

Mandatory battery replacement conditions and authorized battery pack information.