Kappa Juno2 - Snapshot Res; Snapshot Delay; User Setup; Technical Info

To Next Page

To Previous Page

7.4.4 Snapshot Res

Insert an SD card in the camera slot if you want to save images with the snapshot button. Use the arrow keys to select one

of the following options in the OSD menu:

 as monitor

 2540 x 1440 (3.5M pixel)

 5M pixel

7.4.5 Snapshot Delay

Depending on the installation of the camera, for example on a microscope, you may get blurred images with the CAPTURE

button for snapshots. In this case, select Snapshot Delay to adjust a delay between the activation of the button and the

actual image acquisition.

7.5 User Setup

You can configure the settings for Date/ Time and Flip Image as user settings or you can reset the settings to default. The

system provides user settings for up to four users.

7.6 Technical Info

Read out version, MAC address, IP address and netmask.