EasyManua.ls Logo

KARA Pure - How Kara Pure works

Default Icon
9 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Safety
• The electrical output must be equipped
with proper grounding
• Always unplug the unit before
maintenance
• Always use parts supplied by the
manufacturer. Failure to do so will void
the warranty.
• Before moving the loca on of the
device, unplug and drain water reservoir
• Indoor use only
Features
• Simple one bu on opera on
• Ac vated carbon air ltra on
• 10 liter water capacity
• Five-stage water  ltra on
• Food grade stainless steel water
reservoir
• Automa c recircula ng loop for
con nuous sani za on
• Built in fault and service indica on
system
• See maintenance for further detail
Filter Priming
• NO TOOLS REQUIRED.
• Filter priming is an automa c func on that occurs upon  rst use of
your Kara Pure and can manually be entered when replacing your
lters. Each new  lter must be primed before consump on of the
water.
• During  rst use, your Kara Pure will automa cally ini ate Filter
Priming.
• Kara Pure will generate 3L of water which will take between 4 to 6
hours, depending on room humidity.
• Once water genera on is complete, Kara Pure’s interface will
automa cally change and ask to proceed to the next step.
• Please follow the on-screen instruc ons to complete the Filter Priming
of your Kara Pure.
• Place a cup into pouring area and press “Begin” to start priming.
• **Water may ini ally be discolored as loose par cles from the  lters
are being removed. These par cles contain carbon and minerals from
the  lters that naturally become loose during shipment and need to be
recompacted. This is completely normal and will become clear upon
comple on on  lter priming.
• Con nually pour water and discard. Your Kara Pure will change screens
when you have completed the Filter Priming process.
• Press “Con nue’ to complete.
6 7

Other manuals for KARA Pure