Kärcher 1350 G User Manual

9
KÄRCHER 1350 G
Pump leaks
••
••
• 3 drops per minute are permissible. You should
contact customer service if the leakage is more
rapid.
Detergent is not being drawn in
••
••
• Set the nozzle to “ ”.
••
••
• Clean the detergent suction hose and filter.
••
••
• Check all the detergent hoses and connections
for leaks.
Appliance will not run
••
••
• Carry out trouble-shooting according to the
operating instructions of the engine
manufacturer.
••
••
• Contact customer service if necessary.
Appliance does not come up to pressure
••
••
• Adjustments may only be carried out by customer
service.
••
••
• Set the nozzle to “ ”.
••
••
• Clean/replace the nozzle.
••
••
• Vent the appliance (see chap. 5).
••
••
• Clean the strainer in the water connection.
• Check the water intake volume (see technical
data, chap. 3).
• Check all the supply lines to the pump for leaks
and blockages.
7. Troubleshooting

Kärcher 1350 G Specifications

General

Brand	Kärcher
Model	1350 G
Category	Pressure Washer
Language	English