Need help?Do you have a question about the Kärcher 302 plus and is the answer not in the manual?
General| Max. pressure | 110 bar |
|---|---|
| Water flow rate | 360 l/h |
| Max. water inlet temperature | 40 °C |
| Voltage | 220 - 240 V |
| Frequency | 50 Hz |
Connect appliance to power source, check voltage. Extension cable notes provided.
Connect water supply, use filter, attach hose. Suction notes provided.
Report damage, recycle packaging materials responsibly.
Screw spray lance onto spray gun and connect hose to outlet.
Draw water from open container; run pump without hose until clear.
Connect spray lance to spray gun, release trigger safety, and switch on appliance.
Connect detergent nozzle, fill container, and use sparingly.
Release trigger to switch off; switch off pump for breaks over 5 minutes.
Switch off, unplug, close water inlet, detach, and release trigger pressure.
Use appliance for cleaning machines, vehicles, buildings, tools, facades, and garden equipment.
Clean nozzle and strainer in water connection.
Prevent frost damage by emptying appliance and storing in frost-free room.
Check mains voltage and connector cable for damage.
Ventilate, clean strainer, check water flow, and inspect inlet pipes.
Clean nozzle and rinse from the front.
Permissible leakage is 3 drops/minute; contact service for more serious leaks.
Overflow valve switches off appliance via pressure switch when trigger is closed.
A selection of common spare parts numbers is listed at the end.
Terms of guarantee valid in every country; consult dealer for claims.
To Next Page