Why is my Kärcher 411 Pressure Washer not reaching operational pressure?
If your Kärcher Pressure Washer isn't reaching operational pressure, several factors could be at play. First, adjust the double nozzle to high pressure or clean it. Next, bleed the air from the appliance. Also, clean the strainer in the water connection and check the inlet water flow rate. Finally, inspect all inlet pipes to the pump for leaks or blockages.
What to do if my Kärcher 411 pump leaks?
A small amount of leakage from the pump of your Kärcher Pressure Washer is normal. Up to 3 drops per minute are permissible. For more serious leakage, contact authorized customer service.
What to do if my Kärcher 411 Pressure Washer has no detergent suction?
If your Kärcher Pressure Washer isn't drawing detergent, first set the double nozzle to low pressure. Then, clean the detergent suction hose with the filter and check it for any leaks.
Connects the appliance to the power source and checks voltage compatibility.
Controls the high-pressure pump for switching ON and OFF.
Attaches water supply hose and details suction from open containers.
Connects the gun with safety ratchet to the high-pressure outlet.
Attaches to the gun for spraying, with adjustable spray patterns.
Instructions for operating the appliance with high-pressure spray.
Guidance on using detergent for cleaning tasks.
Safe procedures for shutting down the high-pressure cleaner.
Monthly tasks include cleaning filters and nozzles.
Recommendations for protecting the appliance from frost.
Checks for power and connection issues when the appliance does not start.
Steps to diagnose and fix issues with insufficient pressure.
Addresses inconsistent pressure and permissible pump leaks.
Troubleshooting steps for when detergent is not being suctioned.
Details the function of the safety valve/overflow valve.
Covers power connection, water connection, and performance data.
Connects the appliance to the power source and checks voltage compatibility.
Controls the high-pressure pump for switching ON and OFF.
Attaches water supply hose and details suction from open containers.
Connects the gun with safety ratchet to the high-pressure outlet.
Attaches to the gun for spraying, with adjustable spray patterns.
Instructions for operating the appliance with high-pressure spray.
Guidance on using detergent for cleaning tasks.
Safe procedures for shutting down the high-pressure cleaner.
Monthly tasks include cleaning filters and nozzles.
Recommendations for protecting the appliance from frost.
Checks for power and connection issues when the appliance does not start.
Steps to diagnose and fix issues with insufficient pressure.
Addresses inconsistent pressure and permissible pump leaks.
Troubleshooting steps for when detergent is not being suctioned.
Details the function of the safety valve/overflow valve.
Covers power connection, water connection, and performance data.
General| Voltage | 220-240 V |
|---|---|
| Detergent Tank Capacity | 0.5 l |
| Pressure | 110 bar |
| Max Pressure | 11 MPa |
| Frequency | 50 Hz |
To Next Page
