TROUBLESHOOTING
PROBLEM PROBABLE CAUSE REMEDY
Inadequate cleaning power. Not enough PSI from Ensure unit produces a minimum
pressure washer. 2000 PSI. Most effective cleaning
range is 2500-4000 PSI.
Inadequate water supply. Turn water supply completely "ON"
pressure washer. Ensure unit
produces a minimum of 3.0 GPM.
Engine RPM on pressure Increase throttle.
washer is too low.
Nozzle obstructed or worn. Clean or replace as necessary.
Rotating bar will not rotate. Seal has drag. Allow for break-in period.
Snap ring dislodged. Do not use! Contact your
Customer Service.
Seal malfunction. Do not use! Contact your
Customer Service.
Bearing failure. Do not use! Contact your
Customer Service.
Excessive vibration of Nozzle clogged. Clean or replace.
Surface Cleaner OR
suction to the surface. loose.
Rotating bar or swivel rotor Replace.
bent.
PSI of pressure washer is pressure is a minimum of 2000 PSI
too low. (Won't allow and GPM is a minimum of 3.0.
Rotating Bar to move.)
Nozzle clogged. Clean or replace.
Cleaning too fast. Slow down pace.
normal.
Water shooting from swivel. Seal malfunction. Replace.
12
To Next Page
Loading...
Need help?
General
