What does 'Control is hot' mean on my Kärcher Floor Machine?
If your Kärcher Floor Machine displays 'Control is hot! Allow to cool down!', turn the safety switch to the "0" position. Allow the control to cool down for at least 5 minutes. Reduce the brush pressure significantly if you are on rough ground. If the issue continues, contact aftersales service.
What to do if brush pressure is not reached in Kärcher B 150 R?
If the brush pressure is not reached on your Kärcher Floor Machine, check the brush wear and replace the brush if needed. Also, check the function of the brush heads, ensuring they are lowering and raising correctly.
What does 'Propulsion motor hot' mean on my Kärcher Floor Machine?
If you see 'Propulsion motor hot! Allow to cool down!' on your Kärcher Floor Machine, turn the safety switch to the "0" position and let the machine cool down for at least 15 minutes. If this happens again, contact aftersales service.
Why are the brushes not turning on my Kärcher B 150 R Floor Machine?
If the brushes on your Kärcher Floor Machine do not turn, try the following: * Reduce contact pressure. * Check for and remove any foreign matter blocking the brushes. * If the motor is overloaded, set the programme switch to "OFF", wait 10 seconds, and then set the programme selector switch to the previous function to allow the motor to cool down.
What to do if my Kärcher B 150 R has insufficient water?
If your Kärcher Floor Machine has insufficient water quantity, check the fresh water level and refill the tank if necessary. Also, inspect the hoses for blockages and clean them if required. For the R cleaning head, remove and clean the water distributor strip, and clean the fresh water filter.
How to improve vacuum performance on my Kärcher B 150 R Floor Machine?
If your Kärcher Floor Machine experiences insufficient vacuum performance, try these steps: * Clean the seals between the dirt water reservoir and cover, and check for tightness, replacing if required. * Check the protective turbine strainer for soiling and clean if necessary. * Clean the vacuum lips on the vacuum bar, turn or replace if required. * Check if the cover on the dirt water discharge hose is closed. * Check the suction hose for blockages and clean if required. * Check the suction hose for tightness and replace if required. * Check the setting of the vacuum bar. * Attach additional weight (accessory) to the vacuum bar.
How to refill the fresh water tank on a Kärcher B 150 R Floor Machine?
If the fresh water tank is empty on your Kärcher Floor Machine, refill the fresh water reservoir.
What to do if the waste water tank is full in my Kärcher B 150 R Floor Machine?
If your Kärcher Floor Machine's waste water tank is full, empty the dirt water reservoir to resolve the issue.
How to fix a discharged battery on my Kärcher B 150 R Floor Machine?
If the battery voltage is too low, charge the battery.
What to do if errors appear on the display of my Kärcher Scrubber?
If you encounter errors on the display of your Kärcher Scrubber, turn the program selection switch to "OFF". Wait until the text disappears from the display. Then, turn the program switch back to its previous position. If the error persists, contact customer service and provide the error message.
General| Brand | Kärcher |
|---|---|
| Model | B 150 R |
| Category | Floor Machine |
| Language | English |
Instructions for safely connecting the appliance to a grounded electrical outlet to prevent electric shock.
Details requirements and procedures for training personnel to operate the floor scrubber safely.
Outlines the operator's duty to develop safe working habits and understand the unit's functions.
Provides general guidelines and precautions to be followed before and during operation of the unit.
In case of overloading, the drive motor automatically switches off.
Instructions on how to fill the detergent tank.
How to adjust cleaning parameters using the Intelligent Key.
Guidance on adjusting the vacuum bar for optimal cleaning results.
Outlines routine maintenance tasks to be performed after work, monthly, and yearly.
Details various maintenance procedures, including cleaning strainers and replacing parts.
Addresses hazardous conditions due to excessive operating temperatures.
Guidelines for preventing fires related to the unit's cleanliness and use of cleaning agents.
Ensures identification information on the nameplate remains visible.
Procedures and safety precautions for changing and charging batteries.
Describes the function of the safety button for immediate shutdown of all operations.
Explains how the seat switch deactivates the drive motor when the operator leaves the seat.
Details the intended use of the scrubber vacuum for cleaning and polishing level floors.
Provides information on ingredients and where to find current details online.
Explains the functions of the programme switch for different cleaning modes.
Provides instructions and safety warnings regarding battery handling and charging before initial use.
Details the procedure for charging and handling low-maintenance wet batteries.
Lists the maximum dimensions for batteries compatible with the appliance.
Step-by-step guide on how to safely remove the appliance's batteries.
How to adjust the operator's seat for optimal comfort and control.
Steps to follow to safely turn on the appliance and prepare it for use.
Procedure for verifying the proper function of the parking brake before operation.
Guidance on safely operating the appliance while driving.
Explains motor overload shutdown and recovery procedure.
Detailed instructions for filling detergent and fresh water, including recommended detergents.
How to adjust parameters using the yellow and grey Intelligent Keys.
Procedure for emptying the dirt water reservoir.
Steps for safely shutting down the appliance.
Manages authorizations for Intelligent Keys and display text language.
Instructions for setting the correct battery type for the appliance.
How to change the appliance's display language.
Restores all appliance parameters to their original factory settings.
How to adjust parameters for different cleaning programs.
Safety precautions and procedures for transporting the appliance.
Guidelines for safely storing the appliance indoors.
Step-by-step guide for installing the D cleaning head.
Step-by-step guide for installing the R cleaning head.
Instructions for removing the D cleaning head.
Instructions for removing the R cleaning head.
Guide for replacing the brush rollers on the cleaning head.
Steps for replacing the disc brushes.
Instructions for replacing the side brush.
Procedures to protect the appliance from frost damage.
How to interpret and respond to error messages displayed on the appliance.
To Next Page
