Kärcher BD-405039E - Page 14

9.800-414.0 • Rev. 11/09
OPERATOR’S MANUAL
PRESSURE WASHER
14
H SERIES PUMP EXPLODED VIEW
H SERIES PUMP EXPLODED VIEW PARTS LIST
TORQUE SPECS
ITEM# FT. LBS.
15 135
16 60
25 18
35 4.5
46 30
51 7.6
9.804-491.0
8.749-519.0
8.749-518.0
ITEM PART NO. DESCRIPTION QTY
1 9.803-163.0 Crankcase 1
2 9.803 -195.0 Plunger Guide 3
3*
9.802-606.0 Plunger Oil Seal 3
4*
9.803-190.0 O-Ring Ø1.78 x 37.82 3
5*
9.804-494.0 Pressure Ring 18mm 3
6*
9.804-495.0 "U" Seal, dia 18 x 26mm 3
7* 9.804-496.0 Support Ring 18mm 3
8* 9. 8 0 4 - 497.0 "U" Seal, dia. 18 x 28mm 3
9 9.802-926.0 Brass Plug, 1/2 1
10 9.803-199.0 Copper Washer 3/4 1
11 9.803-290.0 Manifold Housing 1
12* 9.804-498.0 O-Ring Ø2.62 x 23.47 12
13* 9.804-499.0 Valve Assembly 6
14*
9.804-500.0 Teflon Ring 6
15
9.803-292.0 Valve Plug 6
16
9.802-942.0 Manifold Stud Bolt 8
17 9.802-890.0 Lock Washer 8
18 9.803-198.0 Copper Washer 3/8 1
ITEM PART NO. DESCRIPTION QTY
19 9.802-925.0 Brass Plug 3/8 2
24 9.802-884.0 Washer 8
25 9.802-944.0 Hexagonal Screw 8
26 9.804-501.0 Closed Bearing Housing 1
27 9.803-186.0 "O" Ring Ø2.62 x 71.12 2
28 9.804-502.0 Roller Bearing 2
29 9.803-289.0 Crankshaft 1
30 9.803-293.0 Crankshaft Key 1
31 9.802-923.0 Oil Dip Stick 1
32 9.803-139.0 Crankshaft Seal 1
33 9.803-177.0 Shim 2
34 9.804-503.0 Bearing Housing 1
35* 9.802-936.0 Plunger Bolt 3
36* 9.802-885.0 Copper Spacer 3
37* 9.803-188.0 "O" Ring Ø1.78 x 7.66 3
38* 9.803-155.0 Teflon Ring 3
39* 9.804-504.0 Plunger 18mm 3
40* 9.802-888.0 Copper Spacer 3