Kärcher BPP 4000/48 User Manual

– 4
 Danger
Pull out the mains plug before doing any
maintenance or cleaning jobs.
System is under pressure!
After opening the filling or drain lid or before
separating the pipes, open the locking
valve on the pressure side and empty the
system via the drain tap (available in
plumbing stores).
Illustration
 Check pre-filter regularly for dirt. If it is
visibly dirty, proceed as follows:
 Unscrew the lid of the filling nozzle.
 Remove the pre-filter and clean it under
flowing water.
Illustration
 Check the pressure of the air filling in
the storage boiler annually. If neces-
sary, refill up to 2.0 bar in switched off /
zero-pressure state (disconnect device,
open the water cock).
Caution
In order to prevent accidents or injuries,
keep in mind the weight of the appliance
during transport (see Specifications).
 Lift appliance by the carrying handle
and carry it.
 Secure the appliance against shifting
and tipping over.
Caution
In order to prevent accidents or injuries,
keep in mind the weight of the appliance
when selecting a storage location for it (see
Specifications).
 Store the appliance in a frost free area.
Maintenance and Care
Care
Maintenance
Transport
When transporting by hand
When transporting in vehicles
Storage
Storing the Appliance
16 EN

Kärcher BPP 4000/48 Specifications

General

Brand	Kärcher
Model	BPP 4000/48
Category	Water Pump
Language	English