– 8
This remote control allows the following
functions:
Manual on/off switching
Manual switch on and switch off via tim-
er control.
Program-controlled on/off switching using
two timings for switching on/off. This is re-
peated regularly according to the week
days or day blocks that have been set.
The following section describes in detail the
individual functions of remote control. You
will find detailed steps on the pages given
in the table.
Remote control
Symbols on the display
Pump on
Pump off
Irrigation duration
preset programme is
running / active
Activate / set up pro-
gramme 1
Activate / set up pro-
gramme 2
Day of the week / day
block: Irrigation takes
place from Monday to
Friday.
Day of the week / day
block: Irrigation takes
place 7 days a week.
Day of the week / day
block: Irrigation only
takes place on the se-
lected day.
Day of the week / day
block: Irrigation only
takes place on the
weekend.
20 EN
To Next Page
Loading...
