EasyManua.ls Logo

Kärcher HD 10/25 S USA User Manual

Kärcher HD 10/25 S USA
15 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
www.kaercher.com
HD 10/25 S USA
5.961-067 A 2007321 01/04
Question and Answer IconNeed help?

Do you have a question about the Kärcher HD 10/25 S USA and is the answer not in the manual?

Kärcher HD 10/25 S USA Specifications

General IconGeneral
Pressure2500 PSI
Flow Rate2.5 GPM
Power SourceElectric
Hose Length50 ft
Water Flow2.5 GPM
MotorInduction
Operating Pressure2500 PSI

Summary

IMPORTANT SAFETY INSTRUCTIONS

GROUNDING INSTRUCTIONS

Ensures proper grounding for electric shock prevention.

GROUND FAULT CIRCUIT INTERRUPTER PROTECTION

Requires connection to GFCI-protected receptacle for shock protection.

EXTENSION CORDS

Unit components

Use of the cleaner

Details the intended uses of the pressure washer for cleaning.

Safety features

Explains the built-in safety mechanisms like relief valve and pressure switch.

Preparing the unit for use

Unpack the unit

Instructions for unpacking the pressure washer and checking contents.

Check the oil level

Procedure for checking the oil level before operation.

Activate the oil reservoir vent

Steps to activate the vent on the oil reservoir.

Mount the accessories

Guide for attaching the spray lance, hose, and other accessories.

Switching on the unit

Electrical connection

Guidance on proper electrical connection and precautions.

Water connection/Suction feed operation

Instructions for connecting water supply, including mains and suction feed.

Operating the unit

Suctioning water from an open container

Procedure for drawing water from an open container.

Operating with high pressure

Steps for operating the unit at high pressure, including controls.

Selecting the type of spray

Explanation of the symbols

Describes symbols for different spray patterns like pencil jet and fan jet.

Operating with detergent

Recommended cleaning methods

Techniques for using detergent and rinsing with high pressure.

Interrupting the operation

Availability time

Explains the unit's automatic shut-off after a period of inactivity.

Reset availability time

Procedure to reset the unit's availability timer.

Switching the unit off

Transporting the cleaner

Instructions for safely moving the pressure washer.

Storing the cleaner

Frost protection

Measures to protect the unit from frost damage during storage.

Care and maintenance

Before each use

Checks and maintenance tasks to perform before operating the unit.

Every week

Weekly maintenance schedule for the pressure washer.

Annually or after 500 operating hours

Annual or high-hour maintenance tasks, including oil change.

As and when required

Emptying and cleaning the detergent tank

Procedure for emptying and cleaning the detergent reservoir.

Troubleshooting

Indicator light

Explanation of indicator light status (green/red) and how to reset.

Operating status display

Interpreting constant green, flashing green, and flashing red indicator lights.

Fault display

Troubleshooting guide for different fault codes indicated by flashing red lights.

Unit does not work

Steps to diagnose and resolve issues when the unit does not operate.

Unit does not come up to pressure

Troubleshooting steps for low or no pressure output.

Troubleshooting

Pump is leaky

Diagnosing and addressing leaks from the pump unit.

Pump makes a knocking noise

Troubleshooting causes for unusual knocking sounds from the pump.

Detergent is not being drawn in

Steps to resolve issues with detergent suction.

Spare parts

Warranty

Technical Specifications

Related product manuals