Need help?Do you have a question about the Kärcher HD 10/25 S VEX and is the answer not in the manual?
General| Pressure | 250 bar |
|---|---|
| Power | 9.2 kW |
| Voltage | 400 V |
| Dimensions | 560 x 500 x 1090 mm |
| Max Pressure | 275 bar |
| Water Flow Rate | 1000 L/h |
| Max Water Inlet Temperature | 60 °C |
| Max Flow Rate | 1000 L/h |
| Hose Length | 10 m |
| Flow Rate | 1000 L/h |
| Nozzle | Triple nozzle (0°/25°/40°) |
Explains the exclusive and recommended uses for the high-pressure cleaner, including optional accessories.
Details the safety mechanisms and their functions within the unit.
Details how the relief valve and pressure switch operate to control pump function and safety.
Instructions for unpacking the unit, checking for damage, and proper disposal of packaging.
Guidance on how to check the oil level in the reservoir before operation.
Steps to activate the oil reservoir vent by removing the hood and cutting the tip.
Instructions for attaching accessories like the nozzle, spray lance, and high-pressure hose.
Important cautions and requirements for connecting the unit to the electrical power supply.
Procedures for connecting the unit to water sources, including mains and suction feed.
Guidelines for connecting the unit to a water main, including safety regulations.
Procedure for drawing water from an open container, including venting the unit.
Steps for operating the unit with high pressure, including starting the motor and adjusting pressure/flow.
How to select different spray patterns (pencil jet, fan jet) using the nozzle and spray lance.
Description of symbols for different spray types: High-pressure pencil jet, High-pressure fan jet, Low-pressure fan jet.
Tips for effective cleaning using detergent, including spray-off and flushing procedures.
Detailed steps for changing the engine oil, including draining and refilling.
To Next Page