Do you have a question about the Kärcher HD 500 S Plus and is the answer not in the manual?
Brand | Kärcher |
---|---|
Model | HD 500 S Plus |
Category | Pressure Washer |
Language | English |
Connect a water supply hose to the appliance and the water pipe.
Instructions for drawing water from an open container using a suction hose.
Guidance on checking for transit damage and proper disposal of packing materials.
Steps for screwing the spray lance onto the handgun and attaching the carrying handle.
Verify voltage on rating plate matches power source for safe connection.
Details intended uses for cleaning machines, vehicles, buildings, and gardens.
Procedure to remove air from the unit after setup or water interruption.
Instructions for starting, adjusting pressure, and safe operation with high-pressure jet.
Information on using the dirt blaster for stubborn dirt and its high impact cleaning effect.
Steps for using detergents, including dosing, suspension of hose, and rinsing.
How the appliance switches off and on when the handgun trigger is released or pressed.
Procedure for safely shutting down the appliance after use.
Guidance on moving the unit using its handle and wheels, and carrying it over stairs.
Cleaning the detergent hose filter, high-pressure nozzle, and water connection strainer.
Step-by-step instructions for detaching and replacing the nozzle or dirt blaster.
Advice on preventing frost damage by properly emptying and storing the appliance.
Checks to perform if the appliance fails to start or operate, including motor overheating.
Troubleshooting steps for low pressure issues, including spray lance adjustment.
Tips for addressing inconsistent pressure output, like nozzle cleaning.
Information on permissible leakage and when to contact service.
Steps to resolve issues with the detergent suction hose, filter, and setting working pressure.
Arranging safety inspections or service contracts with a Kärcher dealer for advice.
Explanation of the overflow valve as a safety device against exceeding maximum working pressure.
Details on spare parts availability and the terms and conditions of the product guarantee.
Details on electrical power connection requirements, including voltage and load.
Technical details for water supply, including temperature, rate, hose, and pressure.
Key performance metrics, noise emission levels, and unit vibration values.
Physical dimensions (length, width, height) and weight of the appliance without accessories.