Need help?Do you have a question about the Kärcher HDS 551 C and is the answer not in the manual?
General| Pressure | 150 bar |
|---|---|
| Max. Temperature | 80 °C |
| Voltage | 230 V |
| Frequency | 50 Hz |
| Hose Length | 10 m |
Check the oil level in the engine. Fill up if necessary.
Connect the unit to the mains power supply, checking for correct motor rotation.
Set selector switch to 'I' and release handgun. Unit starts briefly.
Adjust the selector switch to the desired temperature for hot water or steam cleaning.
Adjust operating pressure using the regulator or via the handgun controls.
Drain old oil using a collecting container and spout, then refill with new oil.
To Next Page
