Need help?Do you have a question about the Kärcher HDS 7/16 C and is the answer not in the manual?
General| Cable length | 5 m |
|---|---|
| Fuel tank capacity | 15 L |
| Connected load | 4700 W |
| AC input voltage | 400 V |
| Number of phases | 3 |
| AC input frequency | 50 Hz |
| Working pressure (max) | 160 bar |
| Working pressure (min) | 30 bar |
| Heating oil/gas consumption (full load) | 4.1 kg/h |
Weight and Dimensions| Depth | 650 mm |
|---|---|
| Width | 1060 mm |
| Height | 920 mm |
| Weight | 103000 g |
Explains the meaning of key safety symbols displayed on the appliance itself.
Details the function of the overflow valve and pressure switches for pump protection.
Detailed instructions for connecting the spray gun, jet pipe, nozzle, and high-pressure hose using EASY!Lock.
Procedure for switching on the appliance, including indicator lights and potential error checks.
How to set the desired cleaning temperature for hot water or steam operations.
Instructions on how to open and close the trigger gun safely.
Safety precautions and steps for replacing the high-pressure nozzle.
Steps to drain water from the appliance and its conduits to prevent frost damage.
Instructions for flushing the appliance with anti-freeze agent for winter storage.
Specifies recommended maintenance tasks and their frequencies (weekly, monthly, annual).
Interprets blinking error codes from 1 to 6 and suggests troubleshooting steps or customer service contact.
Procedure to remove air from the system to build up pressure correctly.
To Next Page
