10 English
STEP 1:
Release trigger and engage gun
safety lock.
STEP 2:
Turn pressure washer to OFF (0) po-
sition.
STEP 1:
Turn the switch to OFF (0) position
and unplug cord from outlet.
STEP 2:
Turn off the water source.
STEP 3:
Press trigger to release water pres-
sure.
STEP 4:
Release trigger and engage gun
safety lock.
STEP 5:
Disconnect the garden hose from the
water inlet on the unit.
몇 CAUTION
When disconnecting the supply or high
pressure hose, warm water may leak
from the connector after operation.
STEP 6:
Push the housing of the quick con-
nect toward the rear and disconnect
the high pressure hose from the unit.
TAKING A BREAK ... five
minutes or more
SHUTTING DOWN &
CLEAN-UP
To Next Page
