OPERATING INSTRUCTIONS
4
Step1 Connect the high pressure hose to the
unit’s high pressure outlet.
Step2 Insert the spray wand of your
choice into the wand extension. Push in
and turn clockwise to lock spray wand
in place.
Step3 Connect garden hose to unit’s
water inlet.
Step4 Connect garden hose to the
cold water source and turn water on
completely.
Step5 Plug the power cord into the power out-
let. Trigger the gun to eliminate trapped air, wait
for a steady flow of water to emerge from the
spray nozzle.
Step6
Turn on (I) the pressure
washer. The motor starts only if the
trigger of the gun is pulled and shuts
off
when the trigger is released.
To Next Page
Loading...
