USING THE ACCESSORIES
5
GFCI INSTRUCTIONS
Step1 Plug the Ground
Fault Circuit Interrupter (GFCI)
into a working outlet.
Step2 Press “TEST”, then
press “RESET” to assure proper
connection to power.
Note:
The actual
appearance
of the GFCI
may be
different from
this
illustration.
This wand features a 0º pencil jet which rotates 360º for maximum dirt cutting action,
effectively increasing cleaning performance up to 50%. This wand combines the cleaning
performance of a 0º pencil jet with the surface coverage of a wide angle nozzle.
Not recommended for soft materials, siding, painted surfaces, decks or autos.
Dirtblaster
®
spray wand
High/low spray wand
The High/low spray wand allows you to adjust the cleaning pressure. To clean at maximum
pressure, the High/low wand must be positioned to the high pressure setting (+).
To apply detergent, the wand must be positioned to the low pressure setting (-).
For lower pressure turn wand
tip to the minus (-) direction.
For higher pressure turn wand
tip to the plus (+) direction.
WARNING
TO AVOID SERIOUS INJURY,
NEVER POINT SPRAY NOZZLE
AT YOURSELF, OTHER PER-
SONS OR ANIMALS
To Next Page
Loading...
