OPERATING INSTRUCTIONS
4
Step 1 Connect the high pressure hose to
the unit’s high pressure outlet.
Step 2 Insert the spray wand of
your choice into the wand extension.
Press in against the spring tension and
twist into the locked position.
Step 3 Connect garden hose to unit’s
water inlet.
Step 4 Connect garden hose to
the cold water source and turn water
on completely.
Step 5 Plug the power cord into the power
outlet. Trigger the gun to eliminate trapped air,
wait for a steady flow of water to emerge from
the spray nozzle.
Step 6 Turn on the pressure
washer. The motor starts only if
the trigger of the gun is pulled
and shuts off when the trigger is
released.
To Next Page
