Step2 Install the Vario spray wand
into the wand extension. Push in and
turn clockwise to lock spray wand in
place.
OPERATING INSTRUCTIONS
4
Step1 Connect the high pressure hose to the
unit’s high pressure outlet.
Step3
Connect the garden hose to the
water inlet using the quick connect adapter and
coupling.
Step4
Connect garden hose to the
cold water source and turn water on
completely.
Step5 Plug the power cord into the power out-
let. Trigger the gun to eliminate trapped air, wait
for a steady flow of water to emerge from the
spray nozzle.
Step6 Turn on the pressure
washer (I). The motor starts only if the
trigger of the gun is pulled and shuts off
when the trigger is released.
To Next Page
Loading...
