OPERATING INSTRUCTIONS
4
Step1 Connect the high pressure hose to the
unit’s high pressure outlet.
Step2 Install the Wash brush or the
Vario spray wand into the wand exten-
sion. Push in and turn clockwise to lock
spray wand in place.
Step3
Connect garden hose to unit’s
water inlet using the quick connect adapter.
Step4
Connect garden hose to the
cold water source and turn water on
completely.
Step5 Plug the power cord into the power out-
let. Trigger the gun to eliminate trapped air, wait
for a steady flow of water to emerge from the
spray nozzle.
Step6 Turn on the pressure
washer (I). The motor starts only if the
trigger of the gun is pulled and shuts off
when the trigger is released.
To Next Page
Loading...
