To Next PageTo Next Page
Need help?Do you have a question about the Kärcher K 5500 and is the answer not in the manual?
General| Brand | Kärcher |
|---|---|
| Model | K 5500 |
| Category | Vacuum Cleaner |
| Language | English |
Basic precautions to follow when using an electrical appliance, including avoiding fire, electric shock, and injury.
Instructions for servicing appliances with two systems of insulation instead of grounding, requiring qualified service personnel.
Connect the suction hose, telescopic suction tube, and carpet turbo nozzle for initial setup.
Connect the handle to the telescopic suction tube; the holder stores the furniture brush and upholstery nozzle.
Adjust the telescopic suction tube to the desired length for ergonomic handling and comfortable vacuuming.
Fill the water filter container with tap water and add anti-foaming liquid as instructed.
Unwind the power chord, insert the plug into the power outlet, and press the On/Off switch to start the appliance.
Regulate the brushing action using the turbo control switch on the floor nozzle for different carpet types.
Use nylon or natural brushes for hard floor nozzle. Brushes must be replaced as a set for proper operation.
Use the false air slide to reduce suction capacity for delicate surfaces like carpets or upholstery.
The crevice nozzle is for edges, crevices, and around radiators.
Use specific nozzles for wet surfaces. Up to 2.5 liters of liquid can be vacuumed when the container is empty.
Wipe down the exterior with a damp cloth. Do not use aggressive agents. Clean accessories separately.
Change the intermediate filter after at least 8 weeks or earlier if required. Dispose of in residual waste.
Change the HEPA-Plus filter after 15 months or earlier if damaged or dirty. Do not wash the HEPA-Plus filter.
