10 English
Assembly
Before initial startup, mount the loose
enclosed parts on the device.
Mounting the wheels
1. Attach and secure the wheels to the
device.
Mount the handles
1. Attach the transport handle.
2. Attach the carrying handle.
Mounting the coupling
for the water connection
1. Screw the coupling for the water
connection onto the water connec-
tion of the device.
Initial startup
1. Place the device on a flat and level
surface.
2. Insert the high-pressure hose into
the quick coupling until it audibly
latches into place.
3. Connect the high-pressure hose to
the high-pressure gun.
a Squeeze the clamp.
b Pull out the clamp.
c Insert the high-pressure hose.
d Press the clamp in until it latches
into place.
4. Check for a secure connection by
pulling on the high-pressure hose.
5. Insert the power plug into a working
outlet.
To Next Page
Loading...
