4
Step 6
Slide the throttle control to the fast
position. Move the choke lever to the “CHOKE”
position (only if engine is cool). After starting,
move the choke to “RUN”.
Step 7
Pull the starter handle. If
the engine fails to start after 3 pulls
squeeze the trigger gun to release
pressure, and repeat step 7.
OPERATING INSTRUCTIONS
Step 1 Connect the high pressure hose to
the unit’s high pressure outlet.
Step 2 Insert the Vario spray wand
into the gun. Push in and turn clock-
wise to lock spray wand in place.
Step 3 Connect
garden hose to unit’s
water inlet.
Step 4 Connect
garden hose to the
cold water source
and turn water on
completely.
Step 5 Trigger the gun to
eliminate trapped air, wait for a
steady flow of water to emerge
from the spray nozzle.
To Next Page
Loading...
