What to do if the Kärcher Lawn Sweeper displays 'Sit on machine for operation!'?
This message appears when a sweeping or transport program is selected upon starting the machine, and no operator is sitting on the seat. To resolve this, sit on the driver's seat. The selected sweeping/transport operation will then start fully automated.
What does 'Easy oper.switch must be OFF next' mean on Kärcher Floor Machine?
This message appears in connection with message 23. For safety reasons, starting up the appliance requires switching off the program selector switch (OFF position).
What to do if Kärcher KM 105/110 R Bp displays 'MF-module not ready to use x'?
This message appears if the control panel has no connection to the machine control. Perform a program selector switch reset (OFF position).
What does 'Locked HD-tracer' mean on my Kärcher KM 105/110 R Bp?
The two-hand operation button (high emptying system) was pushed in a sweeping program. To resolve this, release the two-hand operation button. Turn the program selector switch to position C (drive). Press the two-hand operation button and keep it down. Operate the high emptying system using the direction keys.
Why Kärcher KM 105/110 R Bp Floor Machine displays 'Valid KiK but no operation rights'?
The Kärcher key is known, however, not approved for this appliance. Use an approved Kärcher key, or program the key with the Supervisor Intelligent Key.
What to do if Kärcher KM 105/110 R Bp Floor Machine displays 'Sit on machine for operation!'?
This message appears when a sweeping or transport program is selected upon starting the machine and no operator is sitting on the seat. To resolve this, sit on the driver's seat. The selected sweeping/transport operation will then start fully automated. This also serves as an inspection of the safety function of the seat switch.
What to do if Kärcher KM 105/110 R Bp displays 'Display SBroompos.not ok'?
This message appears when the optionally available sickle brush cannot move to the factory-set end position. Confirm the message with the OK key (delete). Turn the program selector switch to position C (drive). Change to the desired sweeping program again.
What to do if Kärcher KM 105/110 R Bp displays 'LBroompos.not ok'?
This message appears when the optionally available left side brush cannot move to the factory-set end position. Confirm the message with the OK key (delete). Turn the program selector switch to position C (drive). Change to the desired sweeping program again.
What to do if Kärcher Floor Machine displays 'RBroompos.not ok'?
This message appears when the right side brush cannot move to the factory-set end position. Confirm the message with the OK key (delete). Turn the program selector switch to position C (drive). Change to the desired sweeping program again.
What to do if Kärcher KM 105/110 R Bp Floor Machine displays 'Brushpos. not ok'?
This message appears when the roller brush cannot move to the factory-set end position. Confirm the message with the OK key (delete). Turn the program selector switch to position C (drive). Change to the desired sweeping program again.
General| Brand | Kärcher |
|---|---|
| Model | KM 105/110 R Bp |
| Category | Floor Machine |
| Language | English |
To Next Page
