Kärcher KM 85/50 R Bp Pack 80 Ah Li + FC User Manual (English)

Questions and Answers:

T
tannerjonathanAug 20, 2025
How to troubleshoot a Kärcher KM 85/50 R Bp Pack 80 Ah Li + FC that is not running?
- J
  Juan PowersAug 20, 2025
  If your Kärcher Scrubber isn't running, here are a few things to check: * Charge the battery. * Inspect or replace the fuse protection on the battery terminal. * Ensure someone is in the driver's seat to activate the seat contact switch. * Turn the ignition key to position 1. * Verify the neutral lever's position. * Check that the battery terminals are properly connected. * Examine the battery plug connector.
L
lvasquezAug 22, 2025
What to do if Kärcher Scrubber leaves dust or has insufficient suction power?
- C
  Courtney FriedmanAug 22, 2025
  If you're experiencing dust issues or weak suction with your Kärcher Scrubber, try the following: * Empty the waste container. * Turn on the roller brush or suction fan. * Inspect and replace the seals if necessary. * Check, clean, or replace the dust filter, ensuring it's firmly in place. For light soiling, clean the filter; for heavy soiling or damage, replace it. * Examine the sealing strips for wear; set or replace them as needed. * Close the wet sweeping flap. * Reduce the speed of the side brush or completely raise it.
J
Jimmy SnyderAug 25, 2025
What to do if the battery is too hot in my Kärcher KM 85/50 R Bp Pack 80 Ah Li + FC?
- B
  Bryan MontgomeryAug 25, 2025
  If the battery is too hot, allow the battery to cool down.
E
Emily MaxwellAug 26, 2025
What to do if the battery management system is too hot in Kärcher KM 85/50 R Bp Pack 80 Ah Li + FC Scrubber?
- G
  Gavin SmithAug 26, 2025
  If the battery management system is too hot, allow the battery to cool down.
T
Theresa SalazarAug 27, 2025
How to improve the sweeping performance of my Kärcher KM 85/50 R Bp Pack 80 Ah Li + FC Scrubber?
- L
  Laura LopezAug 28, 2025
  If you find the sweeping performance of your Kärcher Scrubber unsatisfactory, check the following: * Inspect the roller brush and side brush for wear and replace them if needed. * Check the sealing strips for wear and replace them if necessary. * Ensure the coarse dirt flap is fully functional. * Confirm that the roller brush is correctly positioned.
J
James GuzmanAug 29, 2025
What to do if the battery voltage is too low in Kärcher KM 85/50 R Bp Pack 80 Ah Li + FC?
- J
  Jamie Walsh DDSAug 29, 2025
  If the battery voltage is too low, charge the battery.
D
doris32Aug 31, 2025
What to do if Kärcher Scrubber displays ERR_U_BATT_044?
- D
  Deborah DeanAug 31, 2025
  If your Kärcher Scrubber displays the error code ERR_U_BATT_044, fully charge the device, ensuring the battery indicator on the battery pack doesn't show a fault code. If the fault persists, notify Customer Service.
L
Leah LarsonSep 2, 2025
What to do if the Kärcher KM 85/50 R Bp Pack 80 Ah Li + FC Scrubber battery is too cold for charging?
- P
  pwrightSep 2, 2025
  If the battery is too cold for charging, move the Kärcher Scrubber to a warmer place and wait until the battery has warmed up.
J
James SmithSep 4, 2025
What to do if the Kärcher KM 85/50 R Bp Pack 80 Ah Li + FC battery is too cold to output power?
- B
  bensontylerSep 4, 2025
  If the battery is too cold to output power, move the Kärcher Scrubber to a warmer place and wait until the battery has warmed up.
C
cynthia66Sep 6, 2025
What to do if the current consumption during charging is too high on my Kärcher Scrubber?
- J
  Jesus CaseySep 6, 2025
  If the current consumption during charging is too high, unplug the mains plug of the charger, wait 10 seconds, and then re-insert the mains plug. If the malfunction is still displayed, replace the charger.