To Next PageTo Next PageWhat to do if the current consumption of the Kärcher Scrubber is too high?
If the current consumption of the device is too high, switch off the Kärcher Scrubber. If the malfunction occurs again after switching on, look for the fault in the device.
What to do if there is a malfunction during charging process of Kärcher KM 85/50 R Bp Pack 80 Ah Li + FC?
If there is a malfunction during the charging process, unplug the mains plug of the charger, wait 10 seconds, and then re-insert the mains plug. If the malfunction is displayed again, replace the charger.
What to do if Kärcher KM 85/50 R Bp Pack 80 Ah Li + FC Scrubber has a short-circuit?
If there is a short-circuit, check all battery connections.
What to do if cell voltage is too low during discharge in Kärcher KM 85/50 R Bp Pack 80 Ah Li + FC?
If the cell voltage is too low during discharge, charge the battery.
Specifies the intended use of the battery-operated sweeper for commercial cleaning.
Directs users to follow safety instructions for proper and safe operation.
Explains routine care and maintenance procedures for the sweeper.
Provides solutions for common problems encountered with the device.
Explains the purpose of safety devices and why they must remain functional.
Covers safety for operating the sweeper and driving it safely.
Addresses safety for battery handling, charging, and transportation.
Explains safety procedures for cleaning, maintenance, and servicing.
Steps to activate and important safety warnings for the Li-Ion battery pack.
Explains service indicators and daily/weekly customer maintenance tasks.
General