EasyManuals Logo

Kärcher NT 48/1 Original Instructions

Kärcher NT 48/1
28 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #7 background imageLoading...
Page #7 background image
English 7
Notes on the content materials
(REACH)
Current information on content materi-
als can be found at: www.kaercher.de/
REACH
Hazard levels
DANGER
Indication of an imminent threat of
danger that will lead to severe inju-
ries or even death.
WARNING
Indication of a potentially dangerous
situation that may lead to severe inju-
ries or even death.
CAUTION
Indication of a potentially dangerous
situation that may lead to minor inju-
ries.
ATTENTION
Indication of a potentially dangerous
situation that may lead to damage to
property.
Intended use
WARNING
Health risk
Inhalation of dusts that are harmful to
health
Do not use the device for vacuuming
up dusts that are harmful to health.
This wet/dry vacuum cleaner is de-
signed to remove dry dirt and liquids.
This device is suitable for commer-
cial use, e.g. in hotels, schools, hos-
pitals, factories, shops, offices, and
rental companies.
Description of the unit
Illustration A
1 Type plate
2 Mains cable
3 Suction pipe holder
4 Holder for crevice nozzle
5 Drain hose
6 Suction hose
7 Suction head lock
8 Dirt receptacle
9 Chassis
10 Steering roller
11 Chassis handle
12 Floor nozzle
13 Suction pipe
14 Suction hose port
15 Main switch
16 Suction head
17 Carrying handle
18 Cable hooks
19 Angle piece
20 Float
21 Cartridge filter
22 Securing nut
Preparation
1. Unpack the device and install the
accessories.
Illustration B
Initial startup
ATTENTION
Risk due to fine dust / water ingress
Risk of damage to the suction motor.
Make sure that the cartridge filter is al-
ways put on when vacuuming.
Dry vacuuming
An additional paper filter bag can be
used when vacuuming fine dust.
Installing the paper filter bag
1. Unlock and remove the suction
head.
2. Connect the paper filter bag.
Illustration C
Illustration D
3. Fit and lock the suction head.
Wet vacuum cleaning
Installing the squeegees
1. Remove the brush strip.
Illustration E
2. Install the squeegees.

Other manuals for Kärcher NT 48/1

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Kärcher NT 48/1 and is the answer not in the manual?

Kärcher NT 48/1 Specifications

General IconGeneral
Standard nominal width35 mm
Dust capacity48 L
Container materialPlastic
AC input voltage220 - 240 V
AC input frequency50 - 60 Hz
Maximum input power1380 W
Airflow67 l/s
Noise level72 dB
Weight and Dimensions IconWeight and Dimensions
Depth390 mm
Width490 mm
Height780 mm
Weight10500 g

Related product manuals