English 7
1 Charger
2 Carrying handle for device
3 Charging socket
4 Power switch
5 Charge level indicator
6 Trigger gun
7 *Conical jet nozzle for gentle cleaning
8 *Universal brush
9 Flat jet nozzle
10 Water reservoir
11 Water reservoir cap
12 Carrying handle for water reservoir
13 Storage compartment for small
parts
14 Valve opener
15 Fine filter
16 Type plate
17 *Suction hose
18 *Suction hose connection
19 *Water filter
20 *Cap
21 *Accessories box
22 *Viscose cloth
23 *Fur cleaning brush
24 *Micro fiber cloth
*optional
Blink codes
Initial startup
1. Place the device on a level surface.
Battery charging
1. Charge the battery.
Note
The charge level indicator flashes during
the charging process. When the battery
is fully charged, it lights up continuously.
For the duration of the charging time,
see chapter Technical data.
Water supply
ATTENTION
Impurities in the water
Damage to pump and accessories
Fill only clear water into the reservoir.
Make sure that only clear water is
sucked in.
Water supply from integrated water
reservoir
ATTENTION
Incorrect water supply
Damage to the device
Do not fill the water reservoir with de-
tergents, pesticides, or other additives.
Do not immerse the device in water.
Remove the water reservoir for filling.
The battery is be-
ing charged.
The battery is fully
charged.
Low battery volt-
age warning (ap-
prox. 2 minutes
remaining).
The battery is dis-
charged. The de-
vice switches off or
cannot be
switched on.
The motor circuit
breaker has
tripped (see chap-
ter Troubleshoot-
ing guide).
To Next Page
Loading...
Need help?
General
Weight and Dimensions
