24 English
Installation
Installing accessories
1. Push the open end of the accessory onto the steam
nozzle or steam gun until the unlocking button of the
steam nozzle or steam gun engages.
2. Push the open end of the accessory onto the spot-
light nozzle.
3. Connect the connection pipes with the steam nozzle
or steam gun.
a Push the 1st extension tube onto the steam noz-
zle or steam gun until the unlocking button of the
steam nozzle or steam gun engages.
The connection pipe is connected.
b Push the 2nd extension tube onto the
1st extension tube.
The connection pipes are connected.
4. Push the accessory and/or the floor nozzle onto the
free end of the extension tube.
The accessory is connected.
Disconnecting accessories
1. Push the child lock down.
The switch is locked.
To Next Page
Loading...
