Kärcher SC 1 User Manual

English 25
2. Push the unlocking button and pull the parts apart.
Operation
Filling water
Note
Descaling the steam boiler is not required if commer-
cially available distilled water is used.
Note
Warm water reduces the heating-up time.
Note
To do this use the measuring jug supplied. When filling
the water, pay attention to the marking (max. 200 ml).
1. Unscrew the safety lock.
2. Fill a maximum of 200 ml distilled water or tap water
into the steam boiler.
3. Insert the safety lock.
Switch on the appliance
몇WARNING
Risk of scalding
The appliance has a high water outlet if you incline more
than 30° to the side.
Do not incline the appliance more than 30° (maximum
angle) to the side.
1. Place the appliance on a firm subsurface.
2. Insert the mains plug into a socket.
Indicator light lights up green.
After approx. 3 minutes, the appliance is ready for
use.

Kärcher SC 1 Specifications

General

Type	Portable steam cleaner
Capacity	0.2 L
Cord length	4 m
International Protection (IP) code	IPX4
AC input voltage	220 - 240 V
AC input frequency	50 - 60 Hz
Steam pressure	3 bar
Continuous steam performance	35 g/min
Hard floor brush	Yes

Weight and Dimensions

Depth	320.5 mm
Width	127.4 mm
Height	185.7 mm
Weight	1500 g