– 10
Special accessories
The figures of the following special accessories can be found on page 4 of these instructions.
6.997-347.0 Suction hose, by the meter, 3/
4" (19 mm) 25 m
Vacuum-tight spiral hose, to be cut into individual
lengths. Can be used as individual suction assem-
bly combined with connections and suction filters.
6.997-346.0 Suction hose, by the meter, 1"
(25.4mm) 25 m
6.997-351.0 Stainless steel prefilter The removable stainless steel prefilter increases
the functional safety of the immersion pump and
protects the pump impeller from clogging.
6.997-359.0 Pump connection G1 (33.3
mm) incl. Check valve
Suitable for 3/4“ (19 mm) or 1“ (25.4 mm) hoses.
With G1“ (33.3 mm) threaded connection. Insert the
backflow valve instead of the flat seal to prevent the
water from returning into the pump.
6.997-419.0 Flat hose - Set 1" (25.4 mm),
10 m
Flexible flat hose made of PVC and woven textile in-
sert with zinc-coated hose clamp 25 - 40 mm. Espe-
cially recommended for floods to transport the
water. Max. operating pressure: 0.4-0.5 MPa (4-5
bar)
18 EN
To Next Page
Loading...
Need help?
General
