What to do if the pumping capacity of my Kärcher SDP 14000 IQ Level Sensor is reducing?
If the pumping capacity of your Kärcher Water Pump is reducing, it might be due to a blocked suction area. To resolve this, pull out the mains plug and then clean the suction area.
General| Max. delivery capacity | 14000 l/h |
|---|---|
| Max. immersion depth | 7 m |
| Grain size max. | 5 mm |
| Remaining water height | 1 mm |
| Cable type | H07RN-F |
| Cable length | 10 m |
| Voltage | 230 V |
| Frequency | 50 Hz |
| Protection Class | IPX8 |
| Hose Connection | 1 1/4" |
Describes the intended use of the appliance in private households and its limitations.
Information on recycling packaging and old appliances for environmental protection.
Information on where to find current details regarding the ingredients used in the appliance.
Details the warranty terms applicable in each country and how to claim service.
Explains the meaning of danger, warning, and caution symbols used throughout the manual.
Vital safety precautions to prevent electrocution, including checks on power cords and sockets.
Guidance on creating stability for the appliance before any work or operation to prevent accidents.
Steps for preparing the pump, including hose connection and setting the IQ Level Sensor.
Details on how the pump starts and stops based on fluid level and IQ Level Sensor settings.
Instructions for rinsing the pump after use and cleaning the IQ Level Sensor for reliable operation.
Guidelines for safely carrying and securing the pump during transport, considering its weight.
Recommendations for storing the pump, emphasizing a frost-free area.
Details on optional accessories like hoses and prefilters available for the pump.
Identifies common pump faults, their potential causes, and recommended solutions for repair.
Provides key specifications like voltage, power, flow rate, pressure, and dimensions for both models.
Explains how suction height, hose diameter, and length influence the pump's feed volume.
To Next Page