English 7
1 Connection plug
2 Charger
3 Waste water tank
4 Waste water tank cap
5 Suction nozzle unlocking
6 Suction nozzle
7 Squeegee blade
8 Separator
9 LED display
10 Trigger ("ON" / "OFF")
11 Handle
12 Charging socket
13 Microfiber wipe cover
14 Spray lever
15 Spray head
16 Place the wiping attachment
17 Spray bottle
18 Detergent
Assembling the device
1. Insert the suction nozzle with the
squeegee blade into the separator
until the suction nozzle audibly
latches into place.
Initial startup
Battery charging
Note
The device is supplied with a dis-
charged battery. Fully charge the bat-
tery before using the device for the first
time.
1. Plug the charger into a mains sock-
et.
2. Plug the connecting plug into the
charging socket
on the device.
The LED display flashe
s.
The LED display
is constantly lit up
when the device is fully charged. The
charging process takes more than 150
minutes when charging the device for
the first time.
The device is ready for use.
Preparing the spray bottle
1. Fit the spray head on the wiping at-
tachment.
2. Mix detergent.
To Next Page
Loading...
