Pro3&4_4.1
#1=
STEP 2
Position the REAR FOOTPLATES against the bedrail.
Secure the rear of the front FOOTPLATE to the bedrail usingBolt S and Bed
Rail Clamp R as shown.
Note: If you prefer to mount the FOOTPLATES by drilling 3/8" holes through
the truck bedrail, locate the FOOTPLATES as per above, and attach using
included fasteners D, K, & M. We recommend using the pre-drilled hole at
the rear of the FOOTPLATES. You will have to locate and drill a second 3/8"
hole in the FOOTPLATE, as close to the leg as possible (loosely).
To Next Page
Loading...
