Karizma Plus User Manual

KarizmaPlus
Intruder alarm system
Operating instructions
Introduction
The purpose of this user guide is to describe how to operate Karizma plus system. Some of the features
described in this guide may not be applicable to your installation and should be ignored. The engineer from
the alarm company will have completed the System Information Sheet (SIS) in this guide, which gives
information specific to your installation. You will need to refer to this as you read this guide in order to check
if certain features have been used. If in any doubt consult your alarm company.
Alarm company (Installer) name: __________________________________________
Telephone number: _____________________________________________________
Account number: _______________________________________________________
Installation date: _______________________________________________________

Karizma Plus Specifications

General

Brand	Karizma
Model	Plus
Category	Security System
Language	English

Summary

Introduction to KarizmaPlus System

Keypad and Entry Codes

Keypads Overview

Describes how to operate the intruder alarm system using the keypad and its keys.

Entry Codes Explained

Explains different types of entry codes (Normal, Manager, Cleaner, Duress) and their functions.

Setting the System

Fully Setting the System

Instructions for setting the entire alarm system when vacating the premises.

Part-Set the System

Explains how to set only specific zones of the alarm system, typically for night use.

Program B Set

Instructions for setting program B, typically for night-time use.

Quick-Set and Point Omission

Performing a Quick-Set

Allows overriding programmed exit time for a quick 3-second exit period.

Omitting Points During Setting

Procedure to temporarily disable specific detection points during system setting.

Unsetting and Alarm Procedures

Unsetting the System

Procedure for disarming the alarm system using entry codes.

Canceling the Exit Procedure

How to cancel the system setting procedure before the exit period ends.

Silence Alarm and Reset System

Silencing an Alarm

How to silence an active alarm by entering a code.

Resetting after an Alarm

Procedure to reset the system after an alarm event has occurred.

Fault Lockout and Remote Reset

Fault Lockout Explanation

Explains fault lockout conditions and how to view or clear faults.

Remote Reset Procedure

Procedures for resetting the system remotely via central station.

Cleaner Access and Group Shunt

Cleaner Access Details

Details on using specific codes for cleaning or maintenance access.

Group Shunt Facility

How to unset part of the premises using a keyswitch for independent access.

Manager Facilities

Manager Menu Options

Overview of functions available to the manager, including setting, event log, and printing.

Set System as Manager

How a manager can set the system, similar to a normal user.

View Event Log

Procedure for viewing the last 200 events logged by the system.

User and Point Management

Change User Type and Name

How to add, change, or delete user types and names in the system.

Change User Code

Procedure for changing user access codes.

Chime Points Configuration

Instructions for enabling chime function for specific security points.

Advanced System Settings

Omit 24 Hour Points

How to omit specific 24-hour points from triggering alarms.

Set Time and Date

Procedure for setting the system's current time and date.

System Testing

Walktest Procedure

Guide to testing the operation of all security points in the system.

Test Outputs

How to test various system outputs like bell, strobe, and sounders.