35
Care & Maintenance
USING PYROLYTIC FUNCTION(CONTINUED)
5. After door unlocked, use vacuum or wipe
out of the oven with a damp scouring pad.
Press Finish when it is done.
Remove all accessories such as side grids,
sliders, shelves and grill pans
Next
20:00
Select pyro cleaning mode
Light (1.5 hours)
Heavy (2 hours)
Pyrolytic cleaning in progress
(Attention: Don't touch, hot surface)
1:30
Stop
Pyrolytic cleaning has
stopped. Temperature is still
high and door would only be
unlocked when temperature
drop around 120C.
180º
Vacuum or wipe out of the oven
Finish
Note: If you quit the pyro function mid cycle and the door lock has
activated, the door will remain locked for all other functions until the
temperature in the cavity drops below 120℃ for safety purposes.
If PYROLYTIC CLEANING is selected by mistake, just press Stop to terminate it at once and
press Finish to exit to home screen.
To Next Page