28
Connectivity
If the hood controls are
manually overridden
when the hob and hood
are linked, the hood will
operate for 5 minutes
on this manual setting
before returning to
control by the hob.
Ensure the Connectivity Indicator is lit on the hob control panel.
KARLSON AUTO MODE TABLE
HOOD LEVEL
HOB LEVEL SUMMARY
INTENSE MODE ECO MODE
SILENT --- 1-5
1 1-4 6-10
2 5-9 11-15
3 10-14 16-21
4 15-19 22-27
BOOSTER >19 >27
20.00
Connectivity
Hood Connectivity
1. Stop the hood connectivity by touching
the icon on the hob and it will turn
grey .
This will end the pairing. The pairing
process will need to be repeated to relink
the hood and hob.
2. If the hob is switched o, the hood will
continue to operate independently in Timer
mode and the current speed will ash.
The current speed level of the hood will
continue for 5 minutes and step down for
2 minutes at each level until nally
switching o.
IMPORTANT: The extraction rate of the hood will vary based upon
the total power output selected on the hob, as shown in the table
below. Each hob cooking zone has a maximum rated output of 10
comprising 1-9 and Boost (10).
20.00
Connectivity
Hood Connectivity
Auto Mode Level
Intense Mode
ECO Mode
USING THE CONNECTIVITY FUNCTION
B
STOPPING THE CONNECTIVITY FUNCTION
B
To Next Page