Water supply
FAULT IDENTIFICATION AND ELIMINATION
12-6
Fault
No fresh water
Water in interior
Fresh water / discharge display on Bord-
Control Panel does not function.
Possible cause
Fresh water tank empty
Water pump fuse has triggered
Water pump faulty
Pipeline system leaks
Connection of Bord-Control Panel and
measuring probe interrupted
Measuring probe defective
Bord-Control Panel defective
Measuring probe dirty because of residues
in water
Remedy
Fill fresh water tank
Push in fuse (Page 6-2)
Contact specialist workshop
Find fault and seal
Localise fault and close connection
Replace measuring probe
Contact specialist workshop
Clean measuring probe
To Next Page
Loading...