Karmann Ontario - Round Seating Group (635 LS)

Rearrangement of the seating group
Side seating group and lenghtways
bench of the Ontario 635 LS can be
extended to form a round seating unit.
Remove the seat cushion of the
lenghtways bench. Take the seat plank
out of wardrobe and put it between
side seating group and lenghtways
bench.The reinforced side of the seat
plank is located at the lenghtways
bench.Pull the cushion of the side
seating bench about 5 cm onto seat
plank.
The backrest net for the back cushion
is located under the matress in the
alcove or in the wardrobe. Click the
lower rod into the provided clips.
Hang the other rod into the upper
holders. Complete the round seating
unit with the additional cushions.
Round seating group (635 LS)
4-5
D
FURNITURE
D