4
USER GUIDE AND PROGRAMMING INSTRUCTIONS
v Password: A managing password (default is 888888), and open password (default is 123456).
v Card Capacity: A total of 100 cards; user number from 00-99.
v Enter into managing mode:
“ * * 888888 # “
1 Set the Management Code
1. Capacity: 1
2. Ensure to keep the management code in a secure location.
3. Management code: 6 digits only and cannot unlock the door. Program a User Code for door access.
Format: “ * * <Management code> # 5 <New Management password> # ”
Example: “ * * 888888 # 5 999999 #”
Successful setting: 1 long beeps, keypad will remain illuminated. Press “**”
Unsuccessful setting: 2 short beeps.
Exit programming mode by pressing “ * * “
2 Program a User Code
1. Capacity: 1
2. The User Code is used to unlock the door.
3. Length: 4-6 digits
4. If you set a new user code, it will override the previous user code.
Format: “* * <Management Code> # 6 <User Code> # “
Example: “* * 888888 # 6 223344 #”
Example: “* * 888888 # 6 2580 #”
Successful setting: 1 long beep for successful setting
Unsuccessful setting: 2 short beeps.
Exit programming mode by pressing “ * * “
To Next Page
Loading...