WARNING
To avo id injury or damage t o the pr oduct, read and follow all the assembly and operation
instructions before using KAT Walk Coord 2 Core.
This device is intended for use by healthy people aged 14 to 60, who are between 1. 55m/
5'1" and 2m/6'7" of height (recommended 1.60m/ 5'3" to 1.95m/6'5 ” ) and w eight below
130kg (286 lbs.). Do not use the KAT Walk C oord 2 Core if you do not meet the age, height,
or weight requirements, or if your physical condition does not allow for moderate to
intense physical activity. If you ar e uncertain of your health condition, please consult your
doctor prior to using t his devise. Use of th e device for more than 1 hour without a break is
not recommended.
The device h as been designed specifically for per sonal VR entertainment . Use for any other
purpose, including b ut not limited to medical rehabilitation is strictly prohibited.
It is st rictly forbidden to insert fingers, hands or any body part into any moving part(s) and
openings.
Please use the device according to the corresponding instructions o r under the guidance of
a professional to avoid injures
Pregnant women or those with epilepsy, cardiopulmonary diseases,eye diseases,mental
illness, anemia, people u ndergoing postoperative recovery and people with any physical or
limb diseases, especially lower limb diseases are strictly prohibited from using this device
WARNING - This product is not intended for children under the age of 14. The product
SHOULD NOT be sto red in a room that c hildren under the a ge of 14 or pets may access
without supervision. Any spectators should keep a distance of at least 3 feet or 1 meter
while t he product is in operation.
It is the owner's responsibility to follow installation and safety instructions. Failure to
follow instructions may result in product instability and/or risk serious bodily injury or
death to users, bystanders, children, or pets.
Always check the device before use to confirm that it is in a normal state without cracks,
scratches, bumps, bends, oddly moving parts or other signs of wear and tear.Check all
connections and moving parts to ensure that the nuts, bolts, and o ther joint structures are
tightly fastened.
The pr oduct base is slippery. When stepping on a nd off, make sure the anti-slip lock on the
To Next Page
