Kato V50 UNITRAM - The Different Types of Catenary Bases; Installing Catenary Poles P10; Installing Traffic Lights P10; Installing Street Lights and Fences P10

Mounting holes for Catenary Base
10
①
①
or
②
①
①③
①
⑥
⑤
④
⑦
⑦
③
②
①
④
③
Installing Catenary Poles
Installing Traffic Lights
Installing Streetlights and Fences
The Different Types of Catenary Bases
Straight
Track
Curved
Track
Long Base C
Used for mounting a catenary on a middle section of multiple straight tracks.
Used for mounting a catenary on the end sections of multiple straight tracks.
Used for mounting a catenary on a stand alone straight track.
Basic Short Base
Inside of Curve
Outside of Curve
The curved track catenaries
are not symmetrical; note
which sides are meant to be
on the inside and outside of
the curve.
The different Traffic Light
and base pole assemblies
can be interchanged to
create varied Traffic lights
for intersections.
These are just basic examples of how to set up the various lights and fences. The mounting pegs are identical
between the different traffic and street lights, allowing you to mix and match them in any way you choose.
* This slot is meant for mounting optional detail parts, such as #23-215 Utility Pole Set (sold separately)
[Long Base A]
[Long Base B]
[Long Base C]
In the sample setups below, Base C is used.
Catenary bases with rounded ends should be used when adjacent to curved track sections.
Sticker
TrafficLight#1
TrafficLight#3
TrafficLight
TrafficLight#2
(WithTurnSignalandStreetSign)
(WithTurnSignal)
(TrafficLightBase)
Pole
Connector
Pole
Connector
Crosswalk Signal #1
Single Streetlight
Single Streetlight
Double Streetlight
Optional detail slot
*
Fence Fence
Fence
Crosswalk Signal #2
Traffic Light Base
Crosswalk Signal
*