Kato V50 UNITRAM - If You Purchase the V50 UNITRAM Basic Track Set; Packaging Contents

04
02
Packaging
Contents
40-800
V50 UNITRAM Basic Track Set
Items
included
in the
UNITRAM
basic
track set
If you purchase the V50 UNITRAM Basic Track Set:
UNITRAM Track Plates (Track + Road)
2 x Straight Track Plate - 124mm (4 7/8”)
4 x Curved Track Plate with Intersection - R180mm (7”)
Assembled Dimensions:
496mm x 620mm (19 1/2” x 24 3/8”)
UNITRAM Road Plates (Road and Structure Base)
UNITRAM Accessory Kit
Booklets
1 x Road Plate - 124mm (4 7/8”)
2 x Center Road Plate with Intersection
Assembled Dimensions:
186mm x 620mm (7 5/16” x 24 3/8”)
2 x Corner Road Plate with Intersection
1 x Tram Stop Parts Set, 1 x Sticker Set
2 x Sets of Catenary Pole Bases, 1 x Straight, 2 x Curved Catenary Pole Sets
1 x Tram Rerailer, 1 x Unijoiner Removal tool
2 x UNITRAM Track Feeders
18 x Tram Joiners (28 total including pre-installed joiners)
20 x Type A Plate Joiners (32 total including pre-installed joiners)
4 x Type B Plate Joiners
1 x UNITRAM Manual and Quick Start Guide (this book)
Scenery
1 x Two-piece cardboard scenery backdrop
To operate trains on the V50
Basic Track Set you will need,
in addition to the V50:
To operate trains independently on either the Portram Starter Set or the V50 Basic
Track Set, you will need a total of two Kato Power Packs, one for each Light Rail Car.
1 x Kato Power Pack
1 x Light Rail Car
3 x Fence Detail Sets, 2 x Street Traffic Signal Sets, 2 x Streetlight Sets
V50 UNITRAM Basic Track Set
#40-800
Kato Power Pack
- Includes AC Adapter
#22-014