Tire Changer KT-830 User’s Manual
30
TO SEAL LOW PROFILE OR DIFFICULT BEADS, USE THE TURBO
BLAST TO SEAL THE BEAD
◇ To Open the Slide Valve, PUSH the Slide Valve Forward
◇ Close PULL the Slide Valve closed.
◇ Position the Turbo Blast Nozzle to the direct air towards the Rim Center just under the
Rim Lip.
NEVER POINT NOZZLE TOWARDS YOURSELF OR OTHER
PERSONS. INSPECT NOZZLE, TIRE AND WHEEL FOR
DEBRIS. NOZZLE MUST BE POINTED TOWARD TIRE
BEAD AREA. HOLD NOZZLE SECURELY WITH BOTH
HANDS AT ALL TIMES. NEVER OPERATE THE NOZZLE
WITHOUT A TIRE AND WHEEL POSITIONED ON THE
TABLE. DIRT AND DEBRIS COULD BE BLOWN INTO THE
AIR WITH ENOUGH FORCE TO INJURE THE OPERATOR
OR BYSTANDERS.
To Next Page
Loading...
