W H E E L B L A N C E R
- 12 -
all bright and there is buzzing sound (it will be automatically locked when there
is electromagnetic device), clamp the lead block with the same inner imbalance
value on the ruler fixture, pull the ruler until there is buzzing sound and it shows
[***][O--][***], it means that it has reached the horizontal position attached to
the inner lead block. At this time the ruler will be close to the hub, so that the
lead firmly stuck on the hub.
B. Rotate the tire slowly, and fix the tire when the position indicator diode on the
right side is all bright and there is beep (it will automatically lock when there is
electromagnetic device). Clamp the lead block with the same unbalanced value
on the outside side on the ruler clamp, pull the ruler until there is beep and
display [***][--O][***], it means that it has reached the horizontal position
attached to the outside lead block. At this time the ruler will be close to the hub,
so that the lead firmly stuck on the hub.
C, the above operation is in the absence of the laser pointer lead operation, if
there is under the condition of the laser pointer, where there are lead balance
mode, after the complete balance not calculate, slowly turn the tires to the
unbalanced position, tire lock, a laser designator light up automatically, then
match the size of the lead weights on the laser indicating location.
4.4.3 Unbalanced decomposition
To Next Page
Loading...
