Katool KT-X80 - Page 12

To Next Page

To Previous Page

……………………………………………………………...

………………………………………………………………………….

4.2 Hydraulic Power Unit

4.3 Oil

Use wear proof oil for hydraulic drive, in conformity with ISO 6743/4 rules(HM class). The oil with

features similar to those shown in the table is recommended.

Test standards

Features

Value

ASTM D 1298

Density 20°C

0.8 kg/l

ASTM D 445

Viscosity 40°C

32 cSt

ASTM D 445

Viscosity 100°C

5.43 cSt

ASTM D 2270

Viscosity index

104 N°

ASTM D 97

Pour point

~ 30 °C

ASTM D 92

Flash point

215 °C

ASTM D 644

Neutralization number

0.5 mg KOH/g

Change hydraulic oil at 1 year intervals

Check valve

Release valved

Oil outlet

Throttle valve

Overflow valve