……… …………………………………………………………...
…………………………………………………………………………
Only skilled technicians, appointed by the manufacturer,
or by authorized dealers, must be allowed to carry out
installation. Serious damage to people and to the lift can
be caused if installations are made by unskilled
6.1 Checking For Place Suitability
The lift has been designed to be used in covered and sheltered places free of overhead obstructions.
The working place must not be next to washing areas, painting workbenches, solvent or varnish
deposits. The relevant standards of the local Health and Safety at Work regulations, for instance, with
respect to minimum distanceto wall or other equipment, escapes and the like, must be observed.
All areas next to the lift must be well and uniformly lit.
6.2 Concrete Surface
The lift must be placed on the concrete surface suf
f
ciently resistant. The surface must be suitable for
bearing maximum stress values, also in unfavorable working conditions. The surface must be perfectly
6.3 Hydraulic System Connection
•
Connect hydraulic hoses referring to
• Tighten
fi
ttings thoroughly.
To Next Page
Loading...