……………………………………………………………...
………………………………………………………………………….
5.7 Slipping Risks
The risk of slipping can be caused by oil or dirt on the
fl
oor near the lift.
5.8 Electrocution Risks
Avoid use of water, steam, and solvent, varnish jets in the lift area where electric cables are placed and, in
particular, next to the electric panel.
5.9 Risks Resulting From Improper Lighting
Make sure all areas next to the lift are well and uniformly lit, according to local regulations.
5.10 Risks Of Breaking Component During Operation
Materials and procedures, suitable for the designed parameters of the lift, have been used by the
manufacturer to build a safe and reliable product. Operate the lift only for the use it has been designed for
and follow the maintenance schedule shown in the chapter “Maintenance”.
5.11 Risks For Unauthorized Uses
The presence of unauthorized persons next to the lift and on the platforms is strictly forbidden during
lifting as well as when the vehicle has been already lifted.
Any use of the lift other than that herein speci
fi
ed can
cause serious accidents to people in close proximity of the
Keep the area under and around the lift clean. Remove all oil
spills.
To Next Page
Loading...